This is a new level of production reached 40 000 kWh of electricity clean . And speaking of cleanliness, I went for a walk on the roof to ex aminate panels: they are almost as sharp as the day of installation. The snow melting and falling from the roof, boarded the dust and the glass is transparent to share what bird droppings. The February production is the same as that of February 2009. The installation type "Solrif" or photovoltaic tiles is identical to the laying of the slate: the bottom of the top panel is placed on top one below. Snow is not hindered in its descent as it is an aluminum frame overhang on 3 sides of the panels (top and side) but the stick aluminum bottom panel is under the panel the fact that there is no edge, therefore no accumulation of dirt at the bottom and corners.
Pictured above is the side of my left hand side down to my right hand and then the aluminum bar is in the cells:
.JPG)
I think when the panel is entirely surrounded by a frame (pose "butt"), dirt are subjec ent accumulate in the bottom and promote crescents this moss and lichens as can be seen in this photo found on Internet (Googleblog: http://googleblog.blogspot.com/2009/07/should-you-spring-clean-your-solar.html ). It is not among us:
0 comments:
Post a Comment